Used 1969 Chevrolet C20 Custom Camper for sale in Bend, OR

For sale is my 1969 Chevy C20 long bed. Runs, drives, and stops just fine. Has been kept running and basically as my family's work truck the last 50 years. I'm the 3rd owner. Engine is a 454 big block (2 bolt main) bored .030 over, open chambered heads ported and polished, stainless 2.19” intake valves and 1.88” exhaust valves, Scorpion aluminum roller rockers, 3/8” push rods, street friendly Eglin hydraulic cam, Edelbrock RPM air gap intake with Edelbrock performer carb. Try Y chrome headers with ¼” flanges and 2” main down pipes from each cylinder. 2.5 stainless exhaust with Pypes Brand chambered mufflers. It was built well but due to some mistakes during break in this motor will at minimum need rings relatively soon. Still gets out and around alright. Behind the motor is TH400 transmission rebuild with TCI internals and an application specific TCI torque converter. Axles are from a 72 C20, still has the Dana 60 out back but with the benefit of disk brakes up front. All new master cylinder, booster, all brake lines, brake hoses, proportioning valve and calipers were installed around 4 years ago. Good Michelin AT2 tires all round on American Racing Aluminum rims. Stock dash has been cut where the original radio would be and an aluminum adapter fitted to fit a singe DIN modern stereo. Interior is original and needs to be redone. Body is decently strait and solid, rockers, passenger side door skin, and two spots towards the very back bed support have a bit of rust that would need repair. Frame is in great shape, body bushings are original and need replacing, and one trailing arm needs some rust repair. Suspension is in good shape, Rancho adjustable RS9000 shocks all around, (only about 5000 - 7000 miles on them) and new front coil springs.

The truck comes with many spare parts as well as new replacement parts collected in the hopes of restoring it someday. Some include:

Extra driver door and fender
Stock transmission cross member
Spare big block engine components
Interior components and upholstery such as a new seat cover and foam, new seat spring, new upholstered door panels, new dash pad, new arm rests, new aluminum dash (provides mounting for 6 aftermarket gauges in place of factory cluster)
New polyurethane body bushings
New Heat duct components
New polyurethane trailing arm bushings
2 spare tires on rims

Clean Oregon title in my name with good tags through march 2020. If your interested please send me an email with you name, phone number and a good time to call.
Thanks for looking.

$5500 OBO